Fotoware
Overview
FotoWare is a Norwegian software company which, in the space of 20 years, has become a world-leading provider of Digital Asset Management (DAM) solutions. FotoWare was founded in 1997 by Ole Christian Frenning (former press photographer 1974-1985 and photo editor of Aftenposten 1985-1991) and Anders Bergman (former leader of development at Hasselblad Electronic Imaging 1985 – 1994), and was one of the first in the world to offer a DAM system.
More than 250,000 users and 4,000 customers in a wide range of industries worldwide use FotoWare today.
Requirements
To use the CI HUB Connector to connect to Fotoware, you may need a login/user account with the selected system. The availability and/or the right to connect to the third-party system is not part of the CI HUB Connector or the CI HUB Services. To use the Fotoware system there may be additional cost and/or agreements with the provider of the Fotoware system needed. Also to use the Fotoware System you need to licence the „API“ use from Fotoware. Please connect with Fotoware or one of the Fotoware partners.
CI HUB reserves the right to remove third party system from the list of avail. systems or add new third party systems at any time and without notice. To use CI HUB Connector, a full connection to the Internet is required at all times.
Requirements
To use the CI HUB Connector to connect to Fotoware, you may need a login/user account with the selected system. The availability and/or the right to connect to the third-party system is not part of the CI HUB Connector or the CI HUB Services. To use the Fotoware system there may be additional cost and/or agreements with the provider of the Fotoware system needed. Also to use the Fotoware System you need to licence the „API“ use from Fotoware. Please connect with Fotoware or one of the Fotoware partners.
CI HUB reserves the right to remove third party system from the list of avail. systems or add new third party systems at any time and without notice. To use CI HUB Connector, a full connection to the Internet is required at all times.
Benefits
FotoWare Connector can be used across all Adobe CC programs such as Adobe Illustrator, Adobe Photoshop and Adobe Premiere Pro. It also works with Microsoft products.
The connector enables you to work seamlessly in your preferred program without having to leave it and search for the right asset in FotoWare.
With the FotoWare connector you can:
- Drag and drop the images stored from FotoWare in the layout without leaving the program you work in.
- Navigate through all the visual assets and perform the full text search inside the program.
- Easily link and relink broken images.
Multiple connections to the same or several individual data repositories/sources are possible. Connections can be named individually and a tooltip shows information about the current user, the system URL and the connection time. If the connection has expired, the connection can be refreshed. Connections can be "active" or "inactive" which simplify the navigation in a context.
The user interface language can be selected from a menu in the panel once selected, any system language strings used in the panel will show in the selected language. If supported by the connected data repository system, metadata fields and values will also be shown in the selected language. The language selection from the hostapplication will be the default.
All searches will be stored in a local "search history" within the CI HUB connector.
This allows efficient work if searches are recurring.
The search history can be deleted.
CI HUB has 3 different ways to display a result.
- List view
- Grid view
- Detail view
Content that can be displayed in the different views can be configured by the user. The Listview can be sorted by Value. To do so the clumn can be selected. The Grid view will also follow this sort order. All displayed thumbnails can be changed in size for more space or reading comfort within the list view.
The resultview also allows the user to display the folders in the selected navigation. Sometimes this can be confusing, so the user can turn this option on/off.
CI HUB Supports different methods of using assets in the selected host application. In general there are the following options:
- Place and link (Photoshop: Place and Embed)
- Replace
- Open in "program"
- Save local
Place and Link: (Photoshop: Place and Embed)
With this option the asset will be loaded into the hostprograms "cash" and the link (URL) to the asset in the selected integration will be saved.
Replace: With this option, if you selected an asset or a frame in the active document/Project/Timeline, the frame will be replaced with the asset/Conetent. In the case your hostsystem supports "options" you can also select "place with options" to select extended options.
Open in "Program": In this case the selected asset will be opened in the hostprogram. This option is avail. if you select an .INDD in InDesign, or an AI file in Illustrator or a PPT/PPTX in Powerpoint etc.
Save Local: With this option you can download any asset you selected to your local "cash". You can also select the loacation for the local "cash". For all metadata that is displayed in the CI HUB Connector you can drop it into the selected frame of the active document by selecting the metadata you want to use. If the integration supports formatted metadata (the Draft.JS specification need to be used) then the metadata will be inserted in a formatted way.
Support menu item in the burger-menu on the top right side of the panel links directly to support page on ci-hub.com website.
Automatic user license validity check on CI HUB server side.
The CI HUB panel is capable of making some integrations unuseable for a user.
That is realized by a blacklist:
- A blacklist takes care that integrations, that are in that blacklist, are not useable for a user.
Or a whitelist:
- A whitelist takes care that integrations, that are in that whitelist, are useable for a user
CI HUB Connector panel automatically updates to the most current version by simply restarting it (makes sure most recent features and adapters are available to all users without any delay). So you dont have to update manually.
The in-app notification panel shows news and update information. You can find a little letter symbol in the bottom right corner of the panel where you can see all news and updates. It shows up with a red dot, if there are new news available.
Newly registered users can automatically be assigned to a defined licencepool or a black/whitlist. E.g., users whose emailadress ends with the domain "@integrationpartner.com", automatically only get access to the integrations that are intended for this domain.
Load more function in search and folder navigation loads more assets. The paging is defined by the partner.
You can download assets in original scale. This is called regular download. Some integrations may offer downloadable assets in different scales e.g., medium, low, etc. But this feature describes that the integration is cabable of offering assets in original scale.
Metadata that is displayed in the basic area of the asset details section.
These are:
- Name
- Type
- Size
- Width x Height
- Version
- Modified
- Foreign key
- Color space
Dropdown button for a new integration connection.
A button that lists more available integrations. To shorten the list, there is a button at the end of the list to show more integrations.
This checkbox can be unchecked in case you dont want to have some integrations in your integrationlist. As you can see in the dropdown menu, there are checkboxes at the right side of every integration where you can check (visible) or uncheck (invisible) integrations.
You can rename a integration connection for personal preferences. This is pretty need when you have more than one connection of the same integration e.g., OneDrive. To keep a clear structure, you can rename the integration connection.
You can enable or disable a connection of an integration, in case you dont need that connection at that moment.
In case your connection has expired, there is a refresh button at the right side of a integration connection. You can refresh your connection by clicking that button. The user is then redirected to the integration specific login workflow.
A little notification sign indicating that your connection has expired. This symbol shows up as a red warning sign in "connections" tab and in the integration connection list at an integration itself.
A textbox that contains a short description text, the version and the logo of the selected integration. This is a compact form of information about a integration.
Selected assets in document or workspace show up as a search suggestion in searchbar dropdown. This feature helps having a better workflow.
Basic filetype filtering of available assets. E.g., you have a folder with a big variety of assets (images, movies, 3D-Assets etc.), the panel creates basic filetype filters and you can check or uncheck them. So in case you checked the images checkbox, you will get image filetypes.
With this feature you are able to download assets with the same filename but different content. You can find that feature option when clicking "use file" and check the "Enable same filenames" checkbox.
With this feature you are able to upload all assets that are in your linkpanel in the target system. This option can be find in the linkpanel, the very first "plus" button on the right side of "Links".
With this feature you are able to refresh the status of all assets that are in your linkpanel.This option can be find in the linkpanel, the very first "circle" button on the right side of "Links".
This feature checks if the same asset is already located in the target system. You get an information when you try to upload an asset that is already located in the target system.
The document you´re currently looking at will be suggested as a search suggestion.
With the CSV-Esport for DataMerge the user can integrate the metadata fields and the images of one or any number assets/objects into a CSV export. This allows to run the DataMerge function in InDesign for serial productions. The user can thus use InDesign templates to automatically generate e.g. product data sheets, catalogs or advertisements in various formats. The export can also be performed without images if, for example, updates have been made to the metadata fields.
You can upload embeded assets in the target system via linkpanel.
With this feature you can replace all assets that are identical in the document with the desired asset. To do this, select the asset that is present more than once in the document and select an asset in the panel that is to replace these assets. Now click on "Use File" and then on "Replace All".
With this feature it is possible to reuse the last used conversion. So if you select and use an asset with the conversion 1024x800, this option also remains for the next asset.
You can create a profile that contains your created connections. This comes in handy when you need to switch between different tasks that require different connections. With the profile load and save function, this is very easy and works effortlessly. You will find the necessary buttons in the panel on the "Connections" tab, on the right. They are called "Load Connections" and "Save Connections". Of course, these two buttons are only visible when the tab is opened.
oAuth2 authentication makes sure the user grants access to his/her data on the data repository side without requiring CI HUB to even see or store user credentials. oAuth2 is the default auth. used by CI HUB. Depending on the capabilities of the connected system this can be a different implementation.
A custom login page provided by CI HUB with input fields defined by the partner. As a rule, the following input fields are available:
- User name
- Password
- System URL (the URL which specifies which subsystem of the integration the user wants to connect to) further input fields are possible.
The connection is being refreshed automaticly by a so called "refresh token" delivered by the partner API. So to simplify, you dont have to manually log in again, after your connection has expired.
The "total asset count", counts the remaining assets that are found by your search parameters. Not every integration supports this function. The total asset count is displayed on the left side of the result panel.
You can pre-filter your search results.
You can also filter by e.g., date.
Filters may be available in the folder navigation too.
The "total asset count", counts the remaining assets that are found by your search parameters. Not every integration supports this function. The total asset count is displayed on the left side of the result panel.
Metadata that is displayed in the XMP-standard. Some entries are:
- Headline
- State
- Country
- ICC profile
- Original Document ID
- Document ID
- Instance ID
Metadata that is displayed in the IPTC-standard. These are:
- Headline
- Caption
- Instructions
- Copyright notice
- City
- State
- Country
Metadata that is displayed in the EXIF-standard. These are:
- Orientation
- Width x Height
- Resolution
Any selected asset can also be opend at its "original" location.
If the integration supports the "Open in Browser" link, then the
CI HUB Connector opens the selected asset within a browser at its original loaction.
The CI HUB panel doesn’t manage any user permission or logic regarding asset access etc. User access control is provided and managed entirely in the integration.
CI HUB Connector Feature Overview for Fotoware
This is a list of features for the Fotoware Integration
Multiple connections to the same or several individual data repositories/sources are possible. Connections can be named individually and a tooltip shows information about the current user, the system URL and the connection time. If the connection has expired, the connection can be refreshed. Connections can be "active" or "inactive" which simplify the navigation in a context.
The user interface language can be selected from a menu in the panel once selected, any system language strings used in the panel will show in the selected language. If supported by the connected data repository system, metadata fields and values will also be shown in the selected language. The language selection from the hostapplication will be the default.
All searches will be stored in a local "search history" within the CI HUB connector.
This allows efficient work if searches are recurring.
The search history can be deleted.
CI HUB has 3 different ways to display a result.
- List view
- Grid view
- Detail view
Content that can be displayed in the different views can be configured by the user. The Listview can be sorted by Value. To do so the clumn can be selected. The Grid view will also follow this sort order. All displayed thumbnails can be changed in size for more space or reading comfort within the list view.
The resultview also allows the user to display the folders in the selected navigation. Sometimes this can be confusing, so the user can turn this option on/off.
CI HUB Supports different methods of using assets in the selected host application. In general there are the following options:
- Place and link (Photoshop: Place and Embed)
- Replace
- Open in "program"
- Save local
Place and Link: (Photoshop: Place and Embed)
With this option the asset will be loaded into the hostprograms "cash" and the link (URL) to the asset in the selected integration will be saved.
Replace: With this option, if you selected an asset or a frame in the active document/Project/Timeline, the frame will be replaced with the asset/Conetent. In the case your hostsystem supports "options" you can also select "place with options" to select extended options.
Open in "Program": In this case the selected asset will be opened in the hostprogram. This option is avail. if you select an .INDD in InDesign, or an AI file in Illustrator or a PPT/PPTX in Powerpoint etc.
Save Local: With this option you can download any asset you selected to your local "cash". You can also select the loacation for the local "cash". For all metadata that is displayed in the CI HUB Connector you can drop it into the selected frame of the active document by selecting the metadata you want to use. If the integration supports formatted metadata (the Draft.JS specification need to be used) then the metadata will be inserted in a formatted way.
Support menu item in the burger-menu on the top right side of the panel links directly to support page on ci-hub.com website.
Automatic user license validity check on CI HUB server side.
The CI HUB panel is capable of making some integrations unuseable for a user.
That is realized by a blacklist:
- A blacklist takes care that integrations, that are in that blacklist, are not useable for a user.
Or a whitelist:
- A whitelist takes care that integrations, that are in that whitelist, are useable for a user
CI HUB Connector panel automatically updates to the most current version by simply restarting it (makes sure most recent features and adapters are available to all users without any delay). So you dont have to update manually.
The in-app notification panel shows news and update information. You can find a little letter symbol in the bottom right corner of the panel where you can see all news and updates. It shows up with a red dot, if there are new news available.
Newly registered users can automatically be assigned to a defined licencepool or a black/whitlist. E.g., users whose emailadress ends with the domain "@integrationpartner.com", automatically only get access to the integrations that are intended for this domain.
Load more function in search and folder navigation loads more assets. The paging is defined by the partner.
You can download assets in original scale. This is called regular download. Some integrations may offer downloadable assets in different scales e.g., medium, low, etc. But this feature describes that the integration is cabable of offering assets in original scale.
Metadata that is displayed in the basic area of the asset details section.
These are:
- Name
- Type
- Size
- Width x Height
- Version
- Modified
- Foreign key
- Color space
Dropdown button for a new integration connection.
A button that lists more available integrations. To shorten the list, there is a button at the end of the list to show more integrations.
This checkbox can be unchecked in case you dont want to have some integrations in your integrationlist. As you can see in the dropdown menu, there are checkboxes at the right side of every integration where you can check (visible) or uncheck (invisible) integrations.
You can rename a integration connection for personal preferences. This is pretty need when you have more than one connection of the same integration e.g., OneDrive. To keep a clear structure, you can rename the integration connection.
You can enable or disable a connection of an integration, in case you dont need that connection at that moment.
In case your connection has expired, there is a refresh button at the right side of a integration connection. You can refresh your connection by clicking that button. The user is then redirected to the integration specific login workflow.
A little notification sign indicating that your connection has expired. This symbol shows up as a red warning sign in "connections" tab and in the integration connection list at an integration itself.
A textbox that contains a short description text, the version and the logo of the selected integration. This is a compact form of information about a integration.
Selected assets in document or workspace show up as a search suggestion in searchbar dropdown. This feature helps having a better workflow.
Basic filetype filtering of available assets. E.g., you have a folder with a big variety of assets (images, movies, 3D-Assets etc.), the panel creates basic filetype filters and you can check or uncheck them. So in case you checked the images checkbox, you will get image filetypes.
With this feature you are able to download assets with the same filename but different content. You can find that feature option when clicking "use file" and check the "Enable same filenames" checkbox.
With this feature you are able to upload all assets that are in your linkpanel in the target system. This option can be find in the linkpanel, the very first "plus" button on the right side of "Links".
With this feature you are able to refresh the status of all assets that are in your linkpanel.This option can be find in the linkpanel, the very first "circle" button on the right side of "Links".
This feature checks if the same asset is already located in the target system. You get an information when you try to upload an asset that is already located in the target system.
The document you´re currently looking at will be suggested as a search suggestion.
With the CSV-Esport for DataMerge the user can integrate the metadata fields and the images of one or any number assets/objects into a CSV export. This allows to run the DataMerge function in InDesign for serial productions. The user can thus use InDesign templates to automatically generate e.g. product data sheets, catalogs or advertisements in various formats. The export can also be performed without images if, for example, updates have been made to the metadata fields.
You can upload embeded assets in the target system via linkpanel.
With this feature you can replace all assets that are identical in the document with the desired asset. To do this, select the asset that is present more than once in the document and select an asset in the panel that is to replace these assets. Now click on "Use File" and then on "Replace All".
With this feature it is possible to reuse the last used conversion. So if you select and use an asset with the conversion 1024x800, this option also remains for the next asset.
You can create a profile that contains your created connections. This comes in handy when you need to switch between different tasks that require different connections. With the profile load and save function, this is very easy and works effortlessly. You will find the necessary buttons in the panel on the "Connections" tab, on the right. They are called "Load Connections" and "Save Connections". Of course, these two buttons are only visible when the tab is opened.
oAuth2 authentication makes sure the user grants access to his/her data on the data repository side without requiring CI HUB to even see or store user credentials. oAuth2 is the default auth. used by CI HUB. Depending on the capabilities of the connected system this can be a different implementation.
A custom login page provided by CI HUB with input fields defined by the partner. As a rule, the following input fields are available:
- User name
- Password
- System URL (the URL which specifies which subsystem of the integration the user wants to connect to) further input fields are possible.
The connection is being refreshed automaticly by a so called "refresh token" delivered by the partner API. So to simplify, you dont have to manually log in again, after your connection has expired.
The "total asset count", counts the remaining assets that are found by your search parameters. Not every integration supports this function. The total asset count is displayed on the left side of the result panel.
You can pre-filter your search results.
You can also filter by e.g., date.
Filters may be available in the folder navigation too.
The "total asset count", counts the remaining assets that are found by your search parameters. Not every integration supports this function. The total asset count is displayed on the left side of the result panel.
Metadata that is displayed in the XMP-standard. Some entries are:
- Headline
- State
- Country
- ICC profile
- Original Document ID
- Document ID
- Instance ID
Metadata that is displayed in the IPTC-standard. These are:
- Headline
- Caption
- Instructions
- Copyright notice
- City
- State
- Country
Metadata that is displayed in the EXIF-standard. These are:
- Orientation
- Width x Height
- Resolution
Any selected asset can also be opend at its "original" location.
If the integration supports the "Open in Browser" link, then the
CI HUB Connector opens the selected asset within a browser at its original loaction.
The CI HUB panel doesn’t manage any user permission or logic regarding asset access etc. User access control is provided and managed entirely in the integration.
